Protective JPT M7 20w 80w 100w 200w fiber laser marking machine
Machine advantages
(1)The enclosed machine can effectively avoid laser radiation and protect human health.
(2)Inside the machine is equipped with Z-axis drive, which is very convenient for you to carry out marking work.
(3)Although the machine is a closed design, its maximum marking area can reach 300x300mm.
(4)The machine uses genuine high-quality JPT M7 laser. JPT M7 laser source has a very wide range of frequencies (1--4000kHZ)and pulse widths(2--500ns).
Machine main configuration
JPT M7 laser source:(1).Laser source with 3 years warranty (2).Each piece has test report and has a sole serial No,Service life is up to 100,000 hours and maintenance-free during this period. (3).Wider frequency range:1--4000KHZ,the laser has an intelligent adjustment fan to keep the machine stable.
Z axis drive:It is more convenient and easy to use than manual lifting, which can save you a lot of marking work time.
EZCAD control card(1).Each piece has a sole serial No,tocheck to avoid fake, (2).It can install the drive to connect the rotating shaft. (3).Genuine EZCAD control system compatible with win7/8/10 xp.
Newest digita galvo scanner(1).With dual red light and alarm,It has the advantages of fast marking speed and high marking accuracy. (2).Double red light can help you find the focal distance more easily. (3).Alarm: When the machine fails, alarm will prompt you promptly.
Machine parameters
| Model |
Enclose 20w machine |
Enclose 80w machine |
Enclose 100w machine |
| Laser source |
JPT M7 20W laser source |
JPT M7 80W laser source |
JPT M7 100W laser source |
| Average output power |
>20w |
>80w |
>100w |
| Pulse energy |
0.8mj |
1.5mj |
| Pulse Width |
2--350NS |
2--500NS |
| Full power frequency range |
25 ~ 4000KHZ |
53 ~ 4000KHZ |
66 ~ 4000KHZ |
| Frequency adjustable range |
1--4000KHZ |
| Cooling way |
Air cooling |
| Wavelength |
1064nm |
| Marking area |
75x75mm---300x300mm(Optional) |
| Marking speed |
8000mm/s |
| Control program |
Genuine EZCAD control system compatible with win7/8/10 |
| Graphic format supported |
JPG/BMP/DXF/PLT |
| Working voltage |
AC220 50HZ/AC110V 60HZ |
Machine application
| Machine application |
it can marking all metal materials and some plastic materials |
| Application content |
Marking / engraving / cutting/Metal welding |
| Application Industry |
Marking of graphics and text in many fields such as electronic parts, various auto parts, home appliances, hardware tools, mold jewelry, tobacco and military affairs. |
Machine marking samples
Machine packaging
1.Clean the machine surface and make sure that the machine surface is clean.
2.Check that there is no problem with the machine, and then wrap the machine with plastic wrap to prevent the machine from scratching.
3.Then it is packed in wooden cases, surrounded by four sides.
4.The gap between the wooden box and the machine is filled with foam plastics to prevent the machine
from moving back and forth.
5.Put all accessories in the wooden box and check whether there are missing accessories.
6.Then seal the wooden box and use steel nails to keep a firm eye on the surrounding of the wooden box to prevent the wooden box fromscattering.
7.Finally, fix the wooden box firmly with a bandage.
Machine optional accessories
Company Profile
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}